![]() |
Attention pilots flying Aeros hang gliders
We have become aware of a potential problem with the Aeros Combat and Discus hang gliders. The pulley cap screw (marked red on the photo below) was loosened on the VG pulleys. ![]() We strongly recommend you to unscrew cap screws from all pulleys on your gliders, and screw them back using a Loctite compound. Also, refer to the safety bulletin #7 from 19.05.2009 and check the following items:
Make surre the sweep wire shackle is bolted and a safety nut is tighten. Fly safe! Yours, Team Aeros |